The Super-Drive
60 Head is a 60 Watt, all tube head. Tubes used are: 5881 Output and
12AX7WB Pre-amp & Effects Loop. It's
a single channel design with a Dual Stage Gain Control which adjusts
two stages of gain simultaneously, for the smoothest, most gradual
transition between clean, overdriven and heavily distorted settings..
There are two
parallel speaker output jacks and an impedance selector switch.
Amp controls include Master, Gain, Bite, Bass, Mid, Treble
and Presence.
The Super-Drive
60 Head retails for $2,674 USD
Dimensions: 8 7/8"H x 24 1/4"W x 9 1/4"D
AC Power 110 - 240 volts 50 or 60 Hz Internal adjustment
Weight: 35 lbs
AMP FEATURES
| GAIN |
Controls pre-amp drive. Lo-settings produce cleaner
sounds, medium-settings produce overdrive, and high-settings produce heavy distortion. |
| MASTER |
Controls
the overall volume of the output circuit. |
| BITE
SWITCH |
Up-position
produces a brighter sound with more "Bite".
Down-position produces a thicker sound with
a softer treble attack. |
| HI
and LO-GAIN INPUTS |
Hi-gain input produces the highest amount of pre-amp
drive, for overdrive and distortion. Lo-gain
input produces less pre-amp drive, for cleaner sounds. |
| EFFECTS
LOOP |
Tube
driven, line level 1 volt R.M.S. For use with compatible
rack mount effects. |
| 3-POSITION GROUND SWITCH |
Helps
to eliminate ground hum and noise on either side
of the AC power line. |
|
|
|
